Des produits

DESCRIPTION

Informations de base.

Numéro de modèle.	304
Traitement de surface	Coloré
Processus	Laminé à chaud ; laminé à froid
Surface	Surface du moulin ; 2b ; Ba ; Hl ; No.1 ; No.4 ; Miroir couleur
Longueur	2000/2438/3000/6000mm
Largeur	1000/1219/1500/1800/2000mm
Forfait Transport	Forfait d'exportation
spécification	0,4-3 mm
Marque déposée	ZYTC
Origine	Chine
Code SH	7219131900
Capacité de production	1000000000tonnes/an

Description du produit

Nom du produit	Plaque en acier inoxydable ASTM A240 S30408 ​​304 à bon prix
Épaisseur	0,3 mm-200 mm
Largeur	1000mm-2800mm
Longueur	2000 mm, 2438 mm, 3000 mm, 6000 mm OU selon les besoins
Finition	No.1, 2B, HL, NO.4, BA, SB, 1D, 2D, 2C, 2E, NO.5, NO.9
Technique	Laminage à chaud, laminage à froid
Standard	ASTM 240, A480, JIS G 4304, EN 10088-2
MOQ	5 tonnes
Attestation	MTC Type 3.1, PMI, CO
Délai de livraison	7 jours si j'ai du stock

Description du produit
1. Plaque en acier inoxydable ASTM A240 S30408 ​​304 à bon prix (304/310S/309S/316L/317L/321/347H/2205/2507/904L/254smo/253mA
2. épaisseur : 0,4-200 mm3.largeur : 1000/1219/1500/1800/2000/2500 mm4.Longueur : 2000/2438/3000/6000 mm, ou autre longueur selon vos besoins.5.Surface : décapage ; surface du broyeur ; 2B ; HL ; Numéro 4; 8K ; Miroir coloré ; HL coloré; Surface de gravure, etc.6. Processus : laminé à chaud, laminé à froid,7. La qualité matérielle que nous avons 201,202,1.4371,1.4373,SUS201,SUS202,301,303,304,304L,304LN,304N,309,309S,310,310S,316L,316Ti,317L,321,321H,347H,1.4319, 1.4305,1.4301,1.4306,1.4833,1.4845 ,1.4404,1.4571,1.4438,1.4541,SUS304,SUS304L,SUS309S,SUS310S,SUS316,SUS316Ti,SUS316L,409,409L,410S,420,430,440C,444,1.4016,1.4006, 1.4002,1.4125,1.4501,1.4362,1.4460,1.4521,1.4545 ,1.4542,1.4568,1.4547,F51,F52,F53,F55,F60,630,631,17-4PH,15-5PH,S31254,S31803,S32900,S32205,S32750,S32550,S32760,S32304,S31 200,S17400,S17700,904L ,254SMo,1.4462,1.4410,1.4501,1.4362,1.4460,1.4545,1.4542,1.4568,1.4547,1.4529,1.4539 et ainsi de suite.



First of all from the reasons for rusty stainless steel. When the stainless steel surface of the passive film corrosion resistance in the weak part of the formation of pitting due to self-induced reaction, and then the formation of small holes, slowly with chloride ions close to the final formation of a highly corrosive liquid, More speed up the corrosion rate of stainless steel. There is also a reason for the corrosion of cracks between the crystal within the stainless steel, which destroyed the stainless steel surface of the passivation film. Therefore, the surface of stainless steel must always be cleaned and maintained, so as to extend its service life. However, when cleaning the surface of stainless steel should pay attention to: stainless steel surface can not scratch the phenomenon; can not use with bleach ingredients and abrasive cleaning solution, if the use of washing liquid, must be used after the end of clean water rinse.1.When the stainless steel surface is grease, oil pollution, you can use a soft cloth to wipe clean, and then use a neutral detergent or ammonia solution cleaning.2.When the stainless steel surface appears rainbow pattern, because too much use of detergent or oil caused by washing with warm water neutral detergent can be cleaned.3.When the stainless steel surface is dusty or easy to go out of the dirt, you can use soap, weak detergent or ask to rinse. Trademarks on the surface of stainless steel, when washed with warm water or weak detergents, the adhesive ingredients should be rinsed with alcohol or organic solvents.

Prix ​​bon marché 430 304 feuilles d'acier inoxydable

Haute résistance à la traction 40cr 42CrMo 4130 4140 prix de la plaque d'acier doux faiblement allié laminé à chaud

Produits connexes

• Fer W90nife de nickel de tungstène de tige d'alliage lourd élevé de tungstène

• 0,15

• Tube en alliage de nickel N08031

• Matériau Feuille de paroi en acier Corten faiblement allié